Influence of Axial Force in The Intermediate Shaft on the Load Capacity of the Paired Cardan Mechanism
Keywords:
card an mechanism, splined shaft
Abstract
The design of intermediate shaft with axially movablesplined joint must be adapted to the variable position of theshaft axis, i.e. to the change of the joint angle during operation.This design is also used for the reduction of axial forces whichare caused by inaccuracy in the production and assembling ofC(ll·dan mechanisms. The axial force which is generated by frictionof contact swfaces in the splined joint is the function of themagnitude of the transfeJTed torsion moments, splined dimensions,lubrication conditions, and materials used for contactswfaces. It will cause additional bearing loads at cross journalsand in the shaft supports, as well as unallowed vibrations andnoise during operation, thus affecting the safety and lifetime ofthe Cardan mechanism. The theoretical and empirical analysisof Cm·dan mechanisms, which have been studied with andwithout axial forces in the splinedjoint and its effect on durabilityof mechanism elements have been presented.References
I. S. Fisher, R. N. Paul, 'Kinematic displacement analysis
of a double- Cardan- joint driveline', Journal of
Mechanisms, Transmissions, and Automation in Design
, n 3, pp. 263-271, Sept. 1991
E. Obersmit, M. Opalic, S. Susmak, 'Opteretivost zglobnih
spojka', Strojarstvo 3, pp. 10-21, 1977
Hartz, 'Antriebe mit Kreuzgelenkwellen', Antriebstechnik
, N 3, pp. 72-75, 1985
How to Cite
1.
Pavić B, Radoš J, Perše S. Influence of Axial Force in The Intermediate Shaft on the Load Capacity of the Paired Cardan Mechanism. Promet [Internet]. 1 [cited 2024Aug.25];13(1):37-1. Available from: https://traffic.fpz.hr/index.php/PROMTT/article/view/1094
Issue
Section
Older issues
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).